| MPEG Streams |
ISO/IEC 13818 and ISO/IEC 11172 compliant. Accepts ATSC-compliant MPEG-2 Elementary, Packetized Elementary (PES), Transport and Program Streams and MPEG-1 System Streams |
| Video Decoder |
Decodes up to MP@HL (4:2:0) with bitrates up to 80 Mbps, 1920x1080i, 1280x720p, 720x576p, 720x576i, 720x480p or 720x480i. |
| Audio Decoder |
Decodes up to four input streams in the following formats:
- MPEG-1 layers 1 and 2 (ISO/IEC 11172-3) (stereo)
- MPEG-1 layer 3 (ISO/IEC 11172-3) when additional software decoder is installed (stereo)
- ISO/IEC 13818-3.SMPTE 302M-1998 Uncompressed Audio (may contain up to 8 channels each)
- WAV or AIFF PCM audio (stereo)
When IEC61937 or SMPTE 337M-2000 compressed output modes are specified the following formats will be output compressed on AES3 and Embedded audio outputs.
- MPEG-1 layers 1, 2, and 3 (ISO/IEC 11172-3)
- AC-3 & ATSC A/52
- AAC (ISO/IEC 13818-7 1997)
|
| Digital Bitstream Input |
Through PCI-Express bus interface (x1) |
| Video Output Scaling |
Decoded video is scaled as necessary to the selected output resolution. Aspect ratio as indicated in the original stream is maintained. The following output resolutions are supported:
- 720p (1280x720, progressive) at 60Hz, 59.94Hz, 30Hz, 29.97Hz, and 25Hz frame rates.
- 1080i (1920x1080, interlaced) at 30Hz, 29.97Hz, 25Hz, 24Hz, and 23.976Hz frame rates.
- 1080p (1920x1080, progressive) at 30Hz, 29.97Hz, 25Hz, 24Hz, and 23.976Hz frame rates (restricted to 1024 lines of active video).
The field rate of the original stream must match the field rate of the selected output standard or be convertible via 3:2 pulldown. For example, a 720p 59.94Hz input stream may be output at 1080i 29.94Hz but not at 1080i 25Hz.
|
| Digital Video Output |
- SMPTE 292M digital video output, with 12 channels of embedded audio
- DVI (Digital Visual Interface) output via DVI-I Digital/Analog Connector
|
| Analog Video Output |
Provided via DVI-I connector. Conforms with SMPTE 274M, SMPTE 296M and SMPTE 253M. May be configured as:
- YPrPb with sync on Y
- RGB with separate H and V sync
- RGB with sync on all
|
| Digital Audio Output |
Six AES-3id single-ended digital audio outputs through rear-panel DB-15 connector. |
| Analog Audio Output |
1 pair unbalanced via rear-panel DB-15 connector. Two unbalanced audio outputs through two MPC standard stereo sound card connector. |
| LTC |
2V P-P, 1K ohm, output via 2-pin header. BNC adapter available. |
| Machine Control |
9-Pin, RS-422A can be configured as either "Controller" or "Device". Output via on-board header. Adapter to DB9 available. |
| Genlock |
Locks H-sync and V-sync. Allows variable delay from the source signal in 13.47 ns increments. Composite video input, 1V P-P via two pin on-board header. Reference signal output available for daisy-chaining. |
| On-Screen Display |
24-bit (true-color), or 4, 16, or 256 color (indexed). Support for 64 levels of blending or 64 levels of shading. Key-color transparency. |
| Host System Requirements |
Pentium-based PC or better with an available PCI-Express slot (x1) running Windows 2000 or greater. |
| Power Requirements |
3.3v (7.6 W typical), 12v (2.64 W typical) |
| Dimensions |
PCIe card, 6.875 in. (174.63 mm) by 4.2 in. (106.68 mm) excluding connectors |
| Regulatory Approval |
FCC Part 15, Class A. CISPR 22/EN55022, Class A. CISPR 22/EN55024 (98) |
| RoHS Compliance |
Complies with European Commission Directive 2002/95/EC on the Restriction of the Use of certain Hazardous Substances in Electrical and Electronic Equipment. |
Keep in touch
Log In or Register